10-Port Gigabit Ethernet PoE Switch PLANET GSD-1008HP
10-Port Gigabit Ethernet PoE Switch PLANET GSD-1008HP
- Support 10-port 10/100/1000BASE-T Gigabit Ethernet RJ45 copper with 8-port IEEE 802.3af/at PoE Injector (Port-1 to Port-8).
Power over Ethernet
- Complies with IEEE 802.3af/at Power over Ethernet end-span PSE.
- Up to 8 ports of IEEE 802.3af/802.3at devices powered.
- Supports PoE power up to 32 watts for each PoE port.
- Each port supports 54V DC power to PoE powered device.
- 120-watt PoE budget.
- Auto detects powered device (PD).
- Supports PD alive check.
- Circuit protection prevents power interference between ports.
- Remote power feeding up to 100m in standard mode with 250m in extended mode.
Switching
- Hardware-based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X.
- Flow control for full duplex operation and back pressure for half duplex operation.
- Integrates address look-up engine, supporting 2K absolute MAC addresses.
- 9K jumbo frame supports all speeds (10/100/1000Mbps).
- Hardware DIP switch for Standard, VLAN and Extend mode selection; the Extend mode features 20-watt PoE transmit distance of 250m at speed of 10Mbps and VLAN isolation (Only for Port-1 to Port-8).
- Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing.
Hardware
- 9-inch desktop size, 1U height, rack mountable.
- LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act.
- 1 silent fan to provide stable and efficient power performance.
- Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az).
Specifications
Hardware Specifications | |
Copper Port | 10 10/100/1000BASE-T MDI/MDIX Ports |
PoE Injector Port | 8-port with 802.3af/at PoE injector function with Port-1 to Port-8 |
Switch Architecture | Store-and-Forward |
Switch Fabric | 20Gbps |
Switch Throughput@64 bytes | 13.4Mpps@64 bytes |
MAC Address Table | 2K entries, automatic source address learning and aging |
Maximum Frame Size | 9K bytes |
Flow Control | IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex |
LED Indicators | - System: Power (Green) - 10/100/1000BASE-T RJ45 interfaces: 10/100/1000Mbps LNK/ACT (Green) - PoE interfaces: PoE-in-Use (Amber) |
DIP Switch | Selectable operation mode - Standard - VLAN - Extend |
Dimensions (W x D x H) | 220 x 150 x 43 mm (1U height) |
Enclosure | Metal |
Weight | 1205 g |
Power Requirements | AC 100~240V, 50/60Hz, 2.5A max. |
Power Consumption/ Dissipation | System On: Max. 4.1 watts/13.9 BTU PoE Full Loading: Max. 124 watts/423.1 BTU |
ESD Protection | Contact discharge of 6KV DC Air discharge of 8KV DC |
Thermal Fan | 1 |
Power over Ethernet | |
PoE Standard | IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE |
PoE Power Supply Type | End-span |
PoE Power Output | Per port 54V DC, 600mA. max. 32 watts |
Power Pin Assignment | 1/2 (+), 3/6 (-) |
PoE Power Budget | 120 watts |
Max. Number of Class 2 PDs | 8 |
Max. Number of Class 3 PDs | 8 |
Max. Number of Class 4 PDs | 4 |
Standards Conformance | |
Regulatory Compliance | FCC Part 15 Class A, CE |
Standards Compliance | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab Gigabit 1000BASE-T IEEE 802.3x Flow control and back pressure IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3az Energy Efficient Ethernet (EEE) |
Environment | |
Operating | Temperature: 0 ~ 50 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
Storage | Temperature: -10 ~ 70 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
- Bảo hành: 12 tháng.
Tel: | (028) 7300 1535 |
Showroom: | 92K Nguyễn Thái Sơn - Phường 3 - Q.Gò Vấp - Tp.HCM |
Website: | www.sieuthivienthong.com |
Email: | info@sieuthivienthong.com |