Dual WAN VPN Router Cisco RV082

Specifications

Dual WAN

Configurable for Smartlink backup or load balancing

Standards

- 802.3, 802.3u

- IPv4 (RFC 791)

- Routing Information Protocol (RIP) v1 (RFC 1058) and v2 (RFC 1723)

Network protocols

- Dynamic Host Configuration Protocol (DHCP) server, DHCP client, DHCP relay agent

- Static IP

- Point-to-Point Protocol over Ethernet (PPPoE)

- Point-to-Point Tunneling Protocol (PPTP)

- Transparent bridge

- DNS relay, Dynamic DNS (DynDNS, 3322)

Routing protocols

- Static

- RIP v1 and v2

Network Address Translation (NAT)

- Port Address Translation (PAT)

- Network Address Port Translation (NAPT), NAT traversal, one-to-one NAT

Protocol binding

Protocols can be bound to a specific WAN port for load balancing

Network edge (DMZ)

DMZ port, DMZ host

Security

Firewall

SPI, denial of service (DoS), ping of death, SYN flood, land attack, IP spoofing, email alert for hacker attack

Access rules

Up to 50 entries

Port forwarding

Up to 30 entries

Port triggering

Up to 30 entries

Blocking

Java, cookies, ActiveX, HTTP proxy

Content filtering

Static URL blocking or keyword blocking

Secure management

HTTPS, username/password, password complexity

VPN

IPsec

100 IPsec site-to-site tunnels for branch office connectivity

QuickVPN

50 QuickVPN tunnels for remote client access

PPTP

5 PPTP tunnels for remote access

Encryption

Data Encryption Standard (DES), Triple Data Encryption Standard (3DES), and Advanced Encryption Standard (AES) encryption AES-128, AES-192, AES-256

Authentication

MD5/SHA1 authentication

IPsec NAT traversal

Supported for gateway-to-gateway and client-to-gateway tunnels

VPN pass-through

PPTP, L2TP, IPsec

Advanced VPN

Dead peer detection (DPD), IKE, split DNS, VPN backup

Quality of Service (QoS)

Prioritization types

Application-based priority on WAN port

Service-based QoS

Supports rate control or priority

Rate control

Upstream/downstream bandwidth can be configured per service

Priority

Each service can be mapped to one of 3 priority levels

Performance

NAT throughput

200 Mbps

IPsec VPN throughput

97 Mbps

Configuration

Web user interface

Simple browser-based device manager (HTTP/HTTPS)

Management

Management protocols

Web browser, Simple Network Management Protocol (SNMP) v1 and v2c, Bonjour

Event logging

Syslog, email alerts, VPN tunnel status monitor

Upgradability

Firmware upgradable through web browser, imported/exported configuration file

Product dimensions

11.00 in. x 1.75 in. x 9.50 in.

(W x H x D)

279.4 mm x 44.45 mm x 241.3 mm

Ports

8 10/100 RJ-45 ports, 1 10/100 RJ-45 Internet port,

1 10/100 RJ-45 DMZ/Internet port

Power

AC 100~240V, 50~60Hz

Certification

FCC class B, CE Class A cUL, Anatel, MEPS, CCC, PSB, CB, C-tick, KCC