Hỗ trợ kinh doanh

Ms. Linh: 0918 489 013
Ms. Lê: 0916 514 469
Ms. Tuyết: 0915 762 088
Ms. Hiên: 028-73001535
Ms. Tuyền: 028-7300 1535
Ms. Thảo: 028-3588 6355
Ms. Vân: 0914 801 001

Chăm sóc khách hàng

0916 287 068

Cáp kết nối 40 Gigabit QSFP+ to QSFP+ 1 mét D-Link DEM-CB100QXS

Trang Chủ >> Thiết bị mạng >> Thiết bị mạng D-Link >> Cáp kết nối 40 Gigabit QSFP+ to QSFP+ 1 mét D-Link DEM-CB100QXS
Mã số:04053365
Cáp kết nối 40 Gigabit QSFP+ to QSFP+ 1 mét D-Link DEM-CB100QXS

Cáp kết nối 40 Gigabit QSFP+ to QSFP+ 1 mét D-Link DEM-CB100QXS

-40G QSFP+ to QSFP+ 1m Direct Attach Cable (For use on DXS-3600-EM-4QXS module).

-The 40G Passive QSFP+ Twinaxial Direct Attach Cable is a high performance, high bandwidth and cost-effective connection solution that supports 40G Gigabit Ethernet. 

-The 40G Passive QSFP+ Twinaxial Direct Attach Cable is designed to support high-density connections for switches with 40G interface, much faster than SFP+. 

-There are three cable models, including the DEM-CB100QXS (one meter).

Ideal for High-Bandwidth Operations

-The 40G Passive QSFP+ Twinaxial Direct Attach Cable supports speeds of up to 40Gbps, while having lower crosstalk and power consumption than other cables. 

-This makes it an optimal solution for handling high bandwidth transmission within short distances such as within a rack or between racks inside energy-efficient data centers. 

Quad Small Form-factor Pluggable Plus Format

The D-Link 40G Passive QSFP+ Twinaxial Direct Attach Cable uses Quad Small Form-factor Pluggable Plus format (QSFP+) connectors, which integrate four transmitting and four receiving channels. The QSFP+ cable assemblies can replace four standard SFP+ cable assemblies, resulting in higher port density, cost efficiency, and a reduction in power savings compared to standard SFP+.

Save on Costs

-The D-Link 40G Passive QSFP+ Twinaxial Direct Attach Cable features QSFP+ connectors on both ends, thus eliminating the need for expensive QSFP+ transceivers. 

-This makes it more cost-effective than fiber cables which must use QSFP+ transceivers.

Technical Specifications

General Device Rate: 40Gbps 
Connector Type: QSFP+ Cable Assembly
Wire AWG: 30AWG
Minimum Cable Bend Radius 23.5mm
Cable Characteristic Impedance 100Ω
Voltage 30VAC
Current 0.5A
Temperature Operating: -40 to 85°C
Certifications SFP MSA (Multi-Source Agreement)
EIA-364-1000.01
SFF-8436
EIA 364
UL 94
SFF-8431

-Bảo hành: 90 ngày.

Giá: Vui lòng gọi (Đã bao gồm VAT)

Số lượng :

Thêm vào giỏ Mua ngay


Chia se tren Facebook
Sản phẩm liên quan

Tel:(028) 7300 1535
Showroom:92K Nguyễn Thái Sơn - Phường 3 - Q.Gò Vấp - Tp.HCM
Website:www.sieuthivienthong.com
Email:info@sieuthivienthong.com