24x10G and 24xSFP+ Managed Switch NETGEAR M4300-24X24F (XSM4348S)
24x10G and 24xSFP+ Managed Switch NETGEAR M4300-24X24F (XSM4348S)
- M4300-24X24F (XSM4348S) Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3.
- CPU/RAM/FLASH: CPU 800 MHz/1GB RAM/256MB Flash
- 24 x 100/1G/10G RJ45 + 24 x 1G/10G SFP+
- Stacking: Hot-swappable stacking of up to 8 units, vertical or horizontal
- Bandwidth/Throughput: 960 Gbps/714 Mpps
- MAC/ARP Table/IP Multicast Forwarding Entries/IGMP: 128K/8K/1,024 IPv4, 512 IPv6/2K IPv4, 2K IPv6
- VLAN/ACLs/Packet Buffer/Jumbo Frames: 4K/100/56Mb/Up to 9KB packet size
- Application Route Scaling: Static: 64 v4/64 v6, RIP: 512, OSPF: 12,000
- Feature Set: IPv4/IPv6 Static Routing, IPv4: RIP, VRRP; IPv4/IPv6: OSPF, Proxy ARP, PIM-SM, PIM-DM, 6-to-4 tunnels
- PSU Modular: 2 bay, 1 included: APS250W
- Form Factor: Full width, Rack 1U
Specification
Model | M4300-24X24F (XSM4348S) |
FormFactor | Full width 1-unit 1U rack mount |
Switching Fabric | 960 Gps |
10GBASE-T RJ45 ports | 2 ports (shared, back) 100M; 1G; 10G |
10GBASE-X SFP+ ports |
24 ports (independent) 1G; 10G |
PSU | Modular 2 bays 1 PSU included: APS250W |
Fans | Fixed Front-to-back 35.8dB |
Out-of-band Console | Ethernet: Out-of-band 1G port (Front) Console: RJ45 RS232 (Front) Console: Mini-USB (Front) Storage: USB (Front) |
Auto-sensing RJ45 100/1000/10GBASE-T |
24 |
Auto-sensing SFP+ ports 1000/10GBASE-X | 24 (independent) |
Total Usable Port Count | 10G Ports: 48 |
Console ports | Serial RS232 RJ45 (front); Mini-USB (front) |
Service port (Out-of-band Ethernet) | 1 x RJ45 10/100/1000BASE-T (front) |
Storage port | 1 x USB (front) |
PSU Slots | 2 |
Included PSU | 1 x APS250W |
Application with 2nd PSU (sold separately) | RPS (redundant) mode |
Packet Buffer Memory | 56 Mb |
Max physical switches per stack | 8 (any combination of M4300 switches) |
Max physical ports per stack | 384 x 1G ports or 768 x 10G ports or 192 x 40G ports or a combination |
Mixed stacking between 1G models and 10G/40G models | Yes |
Mixed stacking table size | Mixed stacking SDM template is used based on “least common denominator” set of capacities |
Stacking ports (pre-configuration) | No pre-configured stacking port: any 40G or 10G port (copper, fiber) and any media type (RJ45, SFP+, DAC) can be used for stacking |
Stacking ports (max number) | 1G models: up to 4 ports per switch 10G models: up to 16 ports per switch |
Vertical and horizontal stacking topologies | Chain, single ring, dual ring, mesh, spine and leaf |
Distant stacking using fiber | Yes |
Non-stop forwarding (NSF) | Yes |
Hitless management unit failover and failback | Yes, no service interruption across the stack |
Automatic unit replacement (AUR) | Yes |
Distributed Link Aggregation (LAGs across the stack) | Yes |
Throughput | 714 Mpps |
Address database size | 128K MAC addresses |
Forwarding mode | Store-and-forward |
Addressing | 48-bit MAC address |
Number of VLANs | 4,093 VLANs (802.1Q) simultaneously - standalone mode 4,093 VLANs - stack mode (except when mixed stacks of M4300-96X with other models - 1,024 VLANs only) |
Heat Dissipation (BTU) | 1PSU: 610.39 BTU/hr, 2 PSUs in RPS mode: 610.39 BTU/hr |
Mean Time Between Failures (MTBF) @ 25°C ambient (77°F) | 133,176 hours |
Number of MAC Addresses | 128K |
Number of Routes (v4/v6) | 12K |
Number of routing interfaces (including port/vlan) | 128 |
Number of ECMP Next Hops per Route | 16 |
Number of ECMP groups | 256 |
Total ECMP nexthops in Hardware | 4,096 |
Native SDM template | 2K |
Per port | Speed, Link, Activity |
Per device (half-width models) | Power, Fan, Stack Master, Stack ID |
Per device (full width models) | Power 1, Power 2, Fan, Stack Master, Stack ID |
Dimensions | Width: 17.32 inches (44 cm); Height: 1U - 1.73 inches (4.4 cm); Depth: 13.58 inches (34.5 cm) |
Weight | 6.12 kg |
- Bảo hành: 3 năm.
Tel: | (028) 7300 1535 |
Showroom: | 92K Nguyễn Thái Sơn - Phường 3 - Q.Gò Vấp - Tp.HCM |
Website: | www.sieuthivienthong.com |
Email: | info@sieuthivienthong.com |