16-Port 10/100/1000T 802.3at PoE + 2-Port 1000X SFP Switch PLANET GSW-1820HP
16-Port 10/100/1000T 802.3at PoE + 2-Port 1000X SFP Switch PLANET GSW-1820HP
- Support 16-port 10/100/1000BASE-T Gigabit RJ45 copper with 802.3at PoE+ injector function and 2 1000BASE-X SFP slots.
Power over Ethernet
- Complies with IEEE 802.3af/at Power over Ethernet end-span PSE.
- Up to 16 ports of IEEE 802.3af/802.3at devices powered.
- Supports PoE power up to 30 watts for each PoE port, all power up to 240W PoE budget.
- Each port supports 54V DC power to PoE powered device.
- Auto detects powered device (PD).
- Circuit protection prevents power interference between ports.
- Remote power feeding up to 100m.
Switching
- Hardware-based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
- Flow control for full duplex operation and back pressure for half duplex operation
- Integrates address look-up engine, supporting 8K absolute MAC addresses
- 9K jumbo frame supports all speeds (10/100/1000Mbps)
- IEEE 802.1Q VLAN transparency
- Hardware DIP switch for Standard, VLAN and Extend mode selection:
+ VLAN mode: Ports 1 to 14 cannot communicate with each other, but can communicate with the uplink ports 15 to 16 and SFP ports 17 to 18
+ Extend mode: Ports1 to 8 have data rate of 10Mbps. The farthest transmission distance up to 250 meters and all ports can communicate with each other.
- The DIP switch can isolate ports to prevent broadcast storm and defend DHCP spoofing
- Automatic address learning and address aging
- Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az)
Hardware
- 19-inch metal housing, 1U height
- LED indicators for PoE ready and PoE activity
- Ethernet Link Energy-saving technology
- Link down power savings
- Intelligent use of power based on cable length
Specifications
Hardware Specifications | |
10/100/1000BASE-T Copper Ports | 16 auto-MDI/MDI-X ports |
802.3af/802.3at PoE+ Injector Port | 16 |
1000BASE-X SFP/mini-GBIC Slots | 2 |
DIP Switch | Selectable operation mode - Standard - VLAN - Extend |
Dimensions (W x D x H) | 440 x 208 x 44 mm (1U height) |
Enclosure | Metal |
Weight | 2.55kg |
Power Requirements | 100~240V AC, 50/60Hz,3A max. |
Power Consumption/Dissipation | Max. 275 watts/938 BTU |
Thermal Fan | 2 |
Protection | 6KV surge protection 8KV ESD protection |
LED Indicators | System: Power (Green) 10/100/1000T RJ45 Interfaces: 1000 LNK / ACT (Green), 10/100 LNK/ACT (Amber), PoE (Amber) 1000X SFP Interfaces: 1000 LNK / ACT (Green) |
Switching | |
Switch Architecture | Store-and-Forward |
Switch Fabric | 36Gbps/non-blocking |
Switch Throughput@64bytes | 26.8Mpps |
MAC Address Table | 8K entries |
Jumbo Frame | 9216 bytes |
Flow Control | IEEE 802.3x pause frame for full duplex; back pressure for half duplex |
Power over Ethernet | |
PoE Standard | IEEE 802.3at Power over Ethernet Plus/PSE Backward compatible with IEEE 802.3af Power over Ethernet |
PoE Power Supply Type | End-span: 1/2 (+), 3/6 (-) |
PoE Power Output | Per port 54V DC, 300mA. max. 15.4 watts (IEEE 802.3af) Per port 54V DC, 600mA. max. 30 watts (IEEE 802.3at) |
PoE Power Budget | 240 watts |
Number of PDs, 7 watts | 16 |
Number of PDs, 15.4 watts | 15 |
Number of PDs, 30 watts | 8 |
Standards Conformance | |
Regulatory Compliance | FCC Part 15 Class A, CE |
Standards Compliance | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab Gigabit 1000BASE-T IEEE 802.3z Gigabit SX/LX IEEE 802.3x flow control and back pressure IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3az Energy-Efficient Ethernet |
Environment | |
Operating | Temperature: 0 ~ 50 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
Storage | Temperature: -10 ~ 70 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
- Bảo hành: 12 tháng.
Tel: | (028) 7300 1535 |
Showroom: | 92K Nguyễn Thái Sơn - Phường 3 - Q.Gò Vấp - Tp.HCM |
Website: | www.sieuthivienthong.com |
Email: | info@sieuthivienthong.com |