LinkIQ Cable+Network Tester FLUKE LIQ-KIT
Trang Chủ >>
Máy đo >> Máy đo kiểm viễn thông FLUKE >> LinkIQ Cable+Network Tester FLUKE LIQ-KIT
Mã số:29439026
LinkIQ Cable+Network Tester FLUKE LIQ-KIT
- LinkIQ Cable+Network Tester with Remote IDs 1-7, IntelliTone Probe, Quick Reference Guide, USB-C to USB-A cable, Charging cable (with international adapters), Cat 6A patch cord, RJ45/11 Modular Adapter, hanging strap with Remote ID holder, and Duffle Bag
Thông số kỹ thuật
General Specifications | |
Languages supported in UI | English (SW v1.0) |
Weight | 1 lbs 6 oz (624g) |
Battery | Type: Lithium-ion, 3.6 V, 6400 mAh; Life: 8 hours typical; Charge time: 4.5 hours; Charging temperature range: 0 °C to +40 °C |
Power Adapter | Input: 100 to 240 VAC ±10%, 50/60Hz; Output: 15 VDC, 2 A maximum; Class II |
Host Interface | USB type C |
Display | 800 x 480 color capacitive multi-touch |
Dimensions | 8.5 in x 4.5 in |
Operating Temperature | 0°C to 45°C |
Storage Temperature | -10°C đến +60°C |
Operating Relative Humidity | 0 % to 90 %, 0°C to 35°C; 0 % to 70 %, 35°C to 45°C |
Operating Altitude | 4,000 m; 3,200 m with ac adapter |
Vibration | Random, 2 g, 5 Hz-500 Hz |
Drop | 1m drop, 6 sides |
Active Network Diagnostics | |
Diagnostic Protocols | Link Layer Discovery Protocol (LLDP), Cisco Discovery Protocol (CDP), Fast Link Pulses (FLP) |
Nearest Device Diagnostics, (If available through diagnostic protocols) | Switch Name, Port Number, VLAN Name, Advertised Data Rates, Advertised Duplex |
Power Over Ethernet Compatibility | IEEE 802.3af/at (SW v1.0), Hardware negotiation with signature resistance, Software negotiation with LLDP/CDP |
Power Over Ethernet Diagnostics | Advertised Power Class (0 to 8) Advertised Available Power Powered Pairs Diagnostics for both Single and Dual signatures |
Power Over Ethernet Measurements | Loaded Voltage (V) Loaded Power (W) |
Port Blink | Blink the light of the connected port |
Cable Test Specifications | |
Test Port | Shielded 8-pin modular jack accepts 8-pin modular (RJ45) plugs |
Commissioning Autotests | 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T, Wire map Only. Test Speed: 6 seconds for lengths < 70 m |
Cable Types | Balanced twisted-pair cabling; Unshielded twisted-pair; Screened twisted-pair; 2-pair and/or 4-pair |
Wire Map-Only Tests | Document wire map, Length of each pair, Diagnose split pairs, User selectable T568A or T568B, User selectable crossover settings (Straight through, Halfcrossover, Full-crossover). Test speed: 1 second for lengths < 120 m |
Length (Maximum) | 305 m |
Nominal Velocity of Propagation (NVP) | User settable |
Tone Generator | Generates digital tones compatible with Fluke Networks IntelliTone probe. Generates analog tones compatible with general analog probes. |
Remote ID Locators | Use remote ID terminations to identify up to 7 unique ports or office outlets |
- Bảo hành: 12 tháng.
Giá: Vui lòng gọi
Sản phẩm liên quan
Tel: | (028) 7300 1535 |
Showroom: | 92K Nguyễn Thái Sơn - Phường 3 - Q.Gò Vấp - Tp.HCM |
Website: | www.sieuthivienthong.com |
Email: | info@sieuthivienthong.com |
Quảng cáo
Giải pháp kỹ thuật
Thống kê truy cập
117.794.343