Cáp mạng Dintek CAT.6 UTP (1101-04023, 100 mét/thùng)

Trang Chủ >> Cáp mạng và phụ kiện >> Cáp-phụ kiện Dintek >> Cáp mạng Dintek CAT.6 UTP (1101-04023, 100 mét/thùng)
Mã số:11030793
Cáp mạng Dintek CAT.6 UTP (1101-04023, 100 mét/thùng)

Cáp mạng Dintek CAT.6 UTP (1101-04023, 100 mét/thùng)

Part Number: 1101-04023

- Cáp mạng CAT.6 UTP Dintek 4-pairs, 23AWG, 100m/thùng.

- Khoảng cách truyền tín hiệu: 100 mét.

Features

- Conductor sizes for Cat.6 are set at 23AWG

- By keeping the gauge size of the conductor larger, there is less heat generation caused and less drop of voltage over distance

- Capable of handling the latest version of power over ethernet

- Cable has been tested over 500Mhz and has shown performance testing results allowing 10Gbit Ethernet transmission up to a length of 70mtrs

Standards Conformance

- ACMA approved to AS/CA S008 

- ISO/IEC11801 2nd edition CLASS E

- ANSI/TIA-568-2.D standard

- CENELEC EN 50173-1, CENELEC

- PoE++ & 4PPoE - IEEE 802.3bt level 3 & 4

- Flame Rated: CM

Independent Verified Certifications

- Verified to ANSI/TIA-568-2.D Cat.6 102661868CRT-001b

- ACMA approved to AS/CA S008

Specifications

Construction
Conductor
Material Bare Copper
Wire Size 23AWG
Insulation
Material PE
Thickness Nominal: 1.011 mm
Colors Blue/White-Blue | Orange/White-Orange | Green/White-Green | Brown/White-Brown
Unaged Elongation(%) Min. 300%
Unaged Tensile Strength Min. 1.683 Kgf/mm²
Jacket
Material Flame Retardant PVC
Thickness 0.5 ± 0.02 mm
Diameter 6.0 ± 0.2 mm
Color Gray (assorted upon request)
Fire Rated Class CM
Physical Ranges
Insulation
Min. Tension Strength Before Aging: Min. 1.683 Kgf/mm² | After Aging: 75% before aging (100℃ X 48hrs)
Min Elongation (%) Before Aging: 300% | After Aging: 75% before aging (100℃ X 48hrs)
Jacket
Min. Tension Strength Before Aging: Min. 1.407 Kgf/mm² | After Aging: 75% before aging (100℃ X 168hrs)
Min Elongation (%) Before Aging: Min. 100% | After Aging: 50% before aging (100℃ X 168hrs)
Dielectric Strength 2500 VDC / 2 seconds
Min. Bending Radius 50 mm
Max. Pulling Tension 25 lbs
Installation Temperature 0℃ to +50℃
Operating Temperature -20℃ to +70℃
Electrical
Conductor Resistance Max. 7.32 Ω/100m at 20℃
DC Resistance Unbalance Max. 2%
Pair-to-Ground Capacitance Unbalance Max. 160 pF/100m
Dielectric Strength of Insulation 2500 V dc / 2 seconds
Insulation Resistance Test Min. 5000 MΩ·Km
Mutual Capacitance Max. 5600 pF/100m
Impedance 1~100MHz 100Ω ± 15%
Impedance 100-250MHz 100Ω ± 22%
Giá: 1.280.000 VND (Đã bao gồm VAT)

Số lượng :

Thêm vào giỏ Mua ngay


Chia se tren Facebook
Sản phẩm liên quan

Tel:(028) 7300 1535
Showroom:92K Nguyễn Thái Sơn - Phường 3 - Q.Gò Vấp - Tp.HCM
Website:www.sieuthivienthong.com
Email:info@sieuthivienthong.com