Module kết nối đầu báo thường 24V ZETA ZAZM-MI
Module kết nối đầu báo thường 24V ZETA ZAZM-MI
- The ZAZM-MI is supplied in a modern enclosure (2 gang box size) with well protected electronic circuit board to minimize any damages during installation.
- It is supplied with a back box suitable for surface mount indoor installation. Designed and manufactured to meet the requirement of EN54-18 2005 and EN54-17 2005.
Applications
- The ZAZM-MI is a conventional zone that can be used for conventional devices and/or for special detectors that are not available in addressable form such as UV detectors, Aspiration detectors etc.
- For more details and connection information consult the installation guide.
Special Features
- This is a loop powered device, however loop load calculation must be performed to determine the permissable quantity of ZAZM-MI per loop.
- Hand addressed using the 8 way dip switch OR.
- Softly addressed using our handheld MKII Programmer (part no. 48-004).
- Equipped with short circuit line isolator.
- Extensive front unit indications.
Đặc tính kỹ thuật
Model | ZAZM-MI |
Operating Voltage | 17 – 28V DC |
Quiescent Current | 3.5mA |
Alarm Current (LED OFF) | 12.6 mA |
Alarm Current (LED ON) | 13.2 mA |
Isolating Current | 7.3mA |
End of Line Resistor | 6.2k |
Nominal Alarm Triggering Resistor | 1k |
Operating Temperature | -10°C to 55°C |
Max Humidity | 95% RH Non Condensing |
IP Rating | IP21C |
Size | 150 x 90 x 45 mm |
Weight | 220g |
- Bảo hành: 12 tháng.
Tel: | (028) 7300 1535 |
Showroom: | 92K Nguyễn Thái Sơn - Phường 3 - Q.Gò Vấp - Tp.HCM |
Website: | www.sieuthivienthong.com |
Email: | info@sieuthivienthong.com |