Hỗ trợ kinh doanh

Ms. Linh: 0918 489 013
Ms. Lê: 0916 514 469
Ms. Tuyết: 0915 762 088
Ms. Hiên: 028-73001535
Ms. Tuyền: 028-7300 1535
Ms. Thảo: 028-3588 6355
Ms. Vân: 0914 801 001

Chăm sóc khách hàng

0916 287 068

Công tắc cảm ứng hiện diện THEBEN COMPACT OFFICE

Trang Chủ >> Báo cháy-Báo trộm >> Công tắc cảm ứng THEBEN >> Công tắc cảm ứng hiện diện THEBEN COMPACT OFFICE
Mã số:13130021
Công tắc cảm ứng hiện diện THEBEN COMPACT OFFICE

Công tắc cảm ứng hiện diện THEBEN COMPACT OFFICE

Cảm biến hiện diện Compact Office dùng cho điều khiển chiếu sáng tự động, có thêm ngõ ra để  tự động tắt mở điều hòa không khí và quạt thông gió trong văn phòng hoặc phòng khách.

-         Cảm biến sự hiện diện (PIR), 2 kênh, độ nhạy cao.

-         Góc phát hiện rộng 360°

-         Tầm quét 5x5m/8x8m (ngồi/đi)

-         Gắn âm trần

-         Điều chỉnh độ sáng từ 10 ~ 1500 lux

-         Kênh 1, trễ: xung (0,5s), 10s -20 min (tắt) tự điều chỉnh

-         Kênh 2, trễ 10s~120min/0s~10min (tắt/bật)

-         Chức năng nối với cảm biến hoặc công tắc ngoài để điều khiển thủ công.

-         Chức năng mở rộng matster-slave.

-         Chế độ tự động và bán tự động.

-         Chức năng cảm biến an ninh.

-         Phù hợp với các loại đèn: như đèn huỳnh quang, halogen, đèn sợi đốt , đèn led.

-         Tiêu chuẩn chống nước và bụi: IP40

-         Môi trường hoạt động : 0°C…+50°C

 

Features

-         Presence detector (PIR)

-         Square detection area

-         Mixed light measurement

-         Light switch output (relay, 230 V)

-         Presence switch output (relay, potential-free)

-         Automatic control of lighting and HVAC as well as room monitoring function

-         Lighting control with light threshold value and self-learning switch-off delay

-         Choice of fully or semi automatic operation

-         Sensor or switch options for manual switching

-         Pulse function for staircase time switch

-         HVAC control with switch-on and switch-off delay

-         Room monitoring with selective movement detection

-         Fully or semi-automatic: In 'Fully automatic' mode, the lighting switches on and off automatically according to presence and light In 'Semi-automatic' mode, it must be switched on manually and it switches off automatically

-         Manual override: The lighting can be manually switched on or off at any time via sensors or switches

-         Room/corridor sensor function: In the 'corridor' setting, the detector functions as a staircase time switch and it cannot be switched off manually

-         The pulse function is for controlling a staircase time switch

-         Presence switch contact for HVAC control: The switching behaviour of the potential-free contact is only controlled by presence

-         The switch-on delay prevents instantaneous switch on. The contact only closes on completion of the switch-on delay

-         The sensitivity of the presence switch output is reduced in the 'monitoring' position. The contact indicates the presence of people with a high degree of certainty

-         Master/slave parallel switching: Up to ten detectors can be connected with each other to extend the detection area. The master switches the load. All other detectors merely provide presence information as slaves

-         Master/master parallel switching: Up to ten detectors can be connected with each other to control several lighting groups. Each master controls its lighting group according to its own brightness measurements. Presence is detected by all the detectors

-         Device can be connected as master or slave

-         A maximum of 10 detectors can be switched at the same time

-         The switching behaviour of the presence detector is controlled by presence and light.

-         The self-learning switch-off delay adjusts to occupants' behaviour

-         The presence detector has mixed light measurement and is suitable for switching the following types of lamps: fluorescent lamps (FL/PL), halogen and incandescent lamps as well as LEDs

-         The square detection area allows accurate and simple planning

-         Test operation mode checks the detection area and installation

-         The parameters can either be set using the potentiometer or via the optional service remote control QuickSet plus.

 

Specifications

Operating voltage

230 V AC

Frequency

50 Hz

Recommended installation height

2 – 3 m

Installation type

Ceiling installation

Power consumption

0,7 W

Light measurement

Mixed light measurement

Setting range brightness

10 – 1500 lx

Light switch-off delay 

Impuls (0,5 s), 10 s-20 min

Type of contact light

Relay 230 V

Lamps

Incandescent/halogen lamps, Fluorescent lamps, Energy saving lamps, LEDs

Resistive load

1400 VA

Incandescent/halogen lamp load

1200 W

Compact and flourescent lamps

960 VA (cos f = 0,8), 580 VA (cos f = 0,5)

Compact and flourescent lamps (Number of electronic ballasts)

10 x (1 x 58 W), 5 x (2 x 58 W), 16 x (1 x 36 W), 8 x (2 x 36 W), 16 x (smaller than 36 W)

Switch-on delay presence

0 s – 10 min

Presence switch-off delay

10 s-120 min

Type of contact presence

Relay potential-free

Switching capacity presence

50 W (220 V DC), 50 VA (250 V AC) minimale 0,5 mV/10 mA

Switching output

Potential-free

Type of connection

Screw terminals

Max. cable cross section

2 x 2,5 mm²

Mounting plate

70 x 70 mm

Size of concealed housing

 55 mm (NIS, PMI)

Ambient temperature

+0 °C … +50 °C

Type of protection

IP 40 (when fitted)

 

-         Hãng sản xuất THEBEN của Đức.

-         Bảo hành: 12 tháng.

Giá: Vui lòng gọi

Số lượng :

Thêm vào giỏ Mua ngay


Chia se tren Facebook
Sản phẩm liên quan

Tel:(028) 7300 1535
Showroom:92K Nguyễn Thái Sơn - Phường 3 - Q.Gò Vấp - Tp.HCM
Website:www.sieuthivienthong.com
Email:info@sieuthivienthong.com