Hỗ trợ kinh doanh

Ms. Linh: 0918 489 013
Ms. Lê: 0916 514 469
Ms. Tuyết: 0915 762 088
Ms. Hiên: 028-73001535
Ms. Tuyền: 028-7300 1535
Ms. Thảo: 028-3588 6355
Ms. Vân: 0914 801 001

Chăm sóc khách hàng

0916 287 068

Photoelectric Beam Sensor TAKEX PXB-100SW

Trang Chủ >> Báo cháy-Báo trộm >> Báo động TAKEX >> Photoelectric Beam Sensor TAKEX PXB-100SW
Mã số:13306028
Photoelectric Beam Sensor TAKEX PXB-100SW

Photoelectric Beam Sensor TAKEX PXB-100SW

- Our ultra low-current PXB-100SW is designed to be powered by BA-6SLA solar panel and power units for wireless or remote applications without cabling infrastructure.

Features

- 4 x synchronised high power beams.

- Low-current consumption for battery or solar operation.

- 4 selectable beam channels to prevent crosstalk.

- Double modulation for unsurpassed light immunity.

- Increased beam separation minimises nuisance alarms.

- Vivid internal colour aids beam alignment procedure.

- Lightning and surge protection up to 15kV.

- Environmental monitoring circuit.

- Dynamic auto-gain lock (AGL).

- 50,000 lux sunlight immunity.

- IP65 housing.

- Optional BA-6SLA solar panel/battery pack available.

Specifications

Model PXB-100SW
Product type Photoelectric Beam Sensor
Detection system Near infrared pulsed beam interruption system
(TX-RX 4 beam simultaneous interruption)
Infrared beam Double modulation pulsed beam by LED
Protection distance Outdoor 100m (330ft) or less
Indoor 200m (660ft) or less
Max. beam range Outdoor 1000m (3300ft) or less
Indoor 1000m (3300ft) or less
Response time 0.05 sec. to 0.7 sec. (Variable at pot)
Power supply 5 to 30VDC (polarity)
Current consumption 5 to 8VDC
 - Transmitter:
   + Max: 3.7mA
   + Max 8.2mA
- Receiver:
   + Max: 2.3mA
   + Max 10mA
10 to 30VDC
- Transmitter:
   + Max: 5.2mA
   + Max 9.4mA
- Receiver:
   + Max: 3.1mA
   + Max 10.7mA
Alarm output - Dry contact relay output form N.O./N.C switchable
- Contact action : Interruption time (min. 2 sec)
- Contact capacity : 30V (AC/DC) 1A (resistive load) Protective resistor
Environmental output - Dry contact relay output form N.O./N.C. switchable
- Action: activated when weather condition worsens
- Capacity: 30V (AC/DC) 1A (resistive load) Protective resistor
Tamper output - Dry contact relay (N.C.)
- Action: activated when cover is detached
- Capacity: 30V (AC/DC) 0.1A (resistive load) Protective resistor
Alarm LED Red LED (Receiver) ON: when an alarm is initiated
Attenuation LED Red LED (Receiver) ON: when beam is attenuated
Ambient temperature range -35°C to +66°C (-31°F to +151°F)
Beam Adjustment Horizontal : ±90° / Vertical : ±20°
Functions - Modulated beam frequency selection
- Tone indicator
- Environmental module
- Beam power selection
- Transmitting power adjustment
- Alarm output selection
- Environmental output selection
- Monitor jack
- Tamper
- Response time adjustment
- Upper / Lower beam switch
- Wireless Checker
Mounting positions Outdoor, Indoor
IP rating IP65
Wiring Terminals
Weight Transmitter: 1500g (52.5oz)
Receiver: 1550g (54.3oz)
Appearance PC resin (wine red)

- Bảo hành: 12 tháng.

Giá: Vui lòng gọi (Đã bao gồm VAT)

Số lượng :

Thêm vào giỏ Mua ngay


Chia se tren Facebook
Sản phẩm liên quan

Tel:(028) 7300 1535
Showroom:92K Nguyễn Thái Sơn - Phường 3 - Q.Gò Vấp - Tp.HCM
Website:www.sieuthivienthong.com
Email:info@sieuthivienthong.com