Hỗ trợ kinh doanh

Ms. Linh: 0918 489 013
Ms. Lê: 0916 514 469
Ms. Tuyết: 0915 762 088
Ms. Hiên: 028-73001535
Ms. Tuyền: 028-7300 1535
Ms. Thảo: 028-3588 6355
Ms. Vân: 0914 801 001

Chăm sóc khách hàng

0916 287 068

Photoelectric Beam Sensor Outdoor TAKEX PB-IN-50HFA

Trang Chủ >> Báo cháy-Báo trộm >> Báo động TAKEX >> Photoelectric Beam Sensor Outdoor TAKEX PB-IN-50HFA
Mã số:13302975
Photoelectric Beam Sensor Outdoor TAKEX PB-IN-50HFA

Photoelectric Beam Sensor Outdoor TAKEX PB-IN-50HFA

- 4 Synchronized High Power Infrared [Patented]

   + 4 beams are 'and-gated', which helps to prevent false alarms from falling leaves and small animals.

   + The active infrared transmission is exceptionally strong with a maximum arrival distance ten times greater than the specified protection distance.

   + External light compensation circuit provides excellent tolerance against sun light, automobile head lights, fluorescent light or mercury light.

- Four Frequencies Selections: 4 separate choices of frequency avoid cross-talk.

- Beam Transmission Strength Selection: 2 levels of beam transmission strength which can be set to suit the protection distance.

- Easy Beam Alignment

   + Audible signal for alignment [Utillty model]: An alignment tone aids in quick set-up to beams. The tone becomes maximum at peak of beam level.

   + Sensitivity attenuation LED: Lights when beam level is attenuated, which shows low sensitivity.

   + Monitor jack output.

   + Target color

   + Wide adjustment (horizontally ±90°,vertically ±10°)

- RoHS Certified Compliant: Environment friendly. Free from Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyl, Polybrominated diphenyl ether.

- Auto-Gain Lock: Optimal sensitivity gain is automatically set at any coverage distance up to the maximum protection distance. Aut-Gain lock is easily confirmed by sound check.

- Programmed AGC: Sensitivity is automatically increased in bad weather to contend with fog, heavy rain, frost or snow.

- Alarm Memory: Alarm memory LED located on receiver can be automatically reset (flickering 5 min. after an alarm and auto-reset 55 min. after that) or manually controlled.

- Protection Against Frost/Dew: As a special hood is attached on sensor cover, beam protection continues without interruption even when the cover is screened by frost or dew.

- Environmental Module Built-In: Environmental trouble signal is sent when beam reception level is reduced below an acceptable level.

- Other Features

   + Tamper output (transmitter and receiver).

   + Polycarbonate cover excellent at anti-shock.

   + Optional accessories.

Thông số kỹ thuật

Product name Photoelectric beam sensor
Model PB-IN-50HFA
Detection system Near infrared beam interruption system (TR.-RE. 4 beams simultaneous interruption)
Infrared beam Double modulation pulsed beams by LED
Protection distance Outdoor 165' (50m) or less
Max. arrival distance Tenfold 1650' (500m)
Response time 50msec. to 700msec. variable (Standard : 50msec.)
Power supply 12V to 30V DC (non-polarity)
Current consumption 60mA or less at protection (max. 95mA or less)
Alarm output Dry contact relay: NO or NC (selectable)
Reset: Interruption time + off-delay (approx. 1.5sec)
Contact capacity: 30V (AC/DC) 1A or less
Enviromental output Dry contact relay: NO or NC (selectable)
Contact operation: Output when weather condition gets worse
Contact capacity: 30V (AC/DC) 1A or less
Tamper output Dry contact relay: NC
Contact operation: Output when receiver cover is detached
Contact capacity: 30V (AC/DC) 0.1A or less
Alarm LED Red LED (receiver) lights when an alarm is intiated
Sensitivity attenuation LED Red LED (receiver) lights when beam reception is attenuated
Functions Modulated beam frequancy selection, Tone indicator, Environmental module,Beam power selection, Alarm memory indication, Programmed AGC, Auto-gain lock function, Monitor jack.
Beam adjustment Horizontal: +/-90°, Vertical: +/-10°
Ambient temperature range -31F to +151F (-35C to +66C)
Mounting position Outdoor (IP55)
Wiring Terminals
Weight Transmitter: 42oz (1200g)
Receiver: 45.5oz (1300g)
Appearance Resin (wine red)

- Xuất xứ: Nhật Bản.

- Bảo hành: 12 tháng.

Giá: 6.890.000 VND (Đã bao gồm VAT)

Số lượng :

Thêm vào giỏ Mua ngay


Chia se tren Facebook
Sản phẩm liên quan

Tel:(028) 7300 1535
Showroom:92K Nguyễn Thái Sơn - Phường 3 - Q.Gò Vấp - Tp.HCM
Website:www.sieuthivienthong.com
Email:info@sieuthivienthong.com