2-Speed Analog Turntable with Bluetooth TEAC TN-400BT

Trang Chủ >> Âm thanh thông báo >> Âm thanh TEAC >> 2-Speed Analog Turntable with Bluetooth TEAC TN-400BT
Mã số:23172304
2-Speed Analog Turntable with Bluetooth TEAC TN-400BT

2-Speed Analog Turntable with Bluetooth TEAC TN-400BT

- Analog turntable with Bluetooth aptX transmitter that streams music from LP Records wirelessly.

- The TN-400BT is an analog turntable that also allows users to listen to LP records wirelessly via Bluetooth headphones and speakers. A die-cast aluminium platter provides accurate rotational speed while an S-shaped static-balanced aluminum tone-arm provides accurate tracking. The built-in Phono EQ amplifier enables the TN-400BT to be connected to a conventional hi-fi amplifier or a micro hi-fi, while a universal-type headshell allows users to change cartridges with ease.

- A built-in Bluetooth® transmitter also lets users listen to LP records wirelessly with high-quality audio (thanks to the the aptX® and AAC codecs). A USB output, meanwhile, enables users to digitally archive their records on a PC at 16-bit/48kHz resolution (equivalent to CD quality). For  convenience, a quality moving magnet-type cartridge comes pre-installed, so users can quickly start enjoying their records without a lengthy set-up procedure.

Features

- Robust high-density MDF plinth provides both vibration isolation and elegance.

- Available in a selection of contemporary matt finishes, or a natural walnut veneer.

- 3-speed belt-drive mechanism with aluminum die-cast platter (33-1/3, 45, 78 rpm).

- Newly-developed low-resistance spindle for stable rotational speed.

- Static-balanced S-shaped tone-arm with universal-type headshell.

- Pre-installed MM-type AT95E cartridge from Audio-Technica.

- Built-in Phono EQ Amplifier with subsonic filter (off when THRU).

- Built-in TI A/D Converter allows 16-bit/48kHz USB digital output for PC recording.

- High-quality Bluetooth aptX wireless audio transmission.

- Floating-construction using decoupled feet provides high feedback resistance.

- Machined aluminium operation knobs and feet.

- Gold-plated RCA jacks (for LINE/PHONO output) and tone-arm contacts.

- GND terminal on rear panel.

- RCA audio cable with GND wiring included.

Specifications

Model TN-400BT
Turntable section 
Type  Belt Drive
Motor  DC Motor 
Rotation Speeds  33-1/3, 45, 78 rpm 
Deviation of Speed  +/-2%
Wow-and-Flutters  0.20%
Signal-to-Noise Ratio  more than 67 dB (A-weighted)
60 dB (unweighted, 20kHz, LPF) 
Turntable (Platter)  Material: Aluminum Die-cast
Diameter: 30 cm 
Tone-arm section
Type  S-shaped, Static-balanced
Effective Length  223 mm 
Needle Pressure Range  0 to 5g 
Compatible Cartridge Weight  4 to 8 g
14 to 18 g (including Head-shell)
Head-shell and Cartridge sections 
Type  MM-type (VM-type) 
Output Voltage 3.5 mV (1kHz, 5cm/sec.) 
Needle Pressure  2.0 g (+/-0.5 g) 
Cartridge Weight 5.7 g (+/-0.5 g) 
Head-shell Weight  10 g (including nuts, screws, and wires)
Needle Life  approx. 300 hours (depends on conditions) 
Analog Output section 
Connectors  RCA jack x 1 pair (Gold-plated) 
Output Voltage  PHONO: 3.5 mV (+/-3dB)
LINE: 155 mV (-16dB)
Digital Output section 
Connectors  USB B-type (Full-speed, Plug-in Power required) 
Audio Format  PCM 16-bit/48kHz
Required USB Bus Power  5V 500 mA 
General
Operation Power  AC Adapter Input: AC 100-240V, 50/60Hz
AC Adapter Output: DC 12V 500mA 
Power Consumption  1.5 Watts or less 
Standby Power  0.5 Watts or less 
Overall Dimensions (W x H x D)  420 × 117× 356 mm/ 16.5-inch x 4.6-inch x 14.0-inch 
Weight (Net) 4.9 kg/ 10.8 lbs. 
Operating Temperature  +5˚C to +35˚C 

- Bảo hành: 12 tháng.

Giá: 10.728.000 VND (Đã bao gồm VAT)

Số lượng :

Thêm vào giỏ Mua ngay


Chia se tren Facebook
Sản phẩm liên quan

Tel:(028) 7300 1535
Showroom:92K Nguyễn Thái Sơn - Phường 3 - Q.Gò Vấp - Tp.HCM
Website:www.sieuthivienthong.com
Email:info@sieuthivienthong.com